Top-flite TOPQ8409 User Manual download pdf

WARRANTY..... Top Flite

Models guarantees this kit to be free from

defects in both material and workmanship at the date of purchase. This

warranty does not cover any component parts damaged by use or

modification. In no case shall Top Flite’s liability exceed the original cost of

the purchased kit. Further, Top Flite reserves the right to change or modify

this warranty without notice. In that Top Flite has no control over the final

assembly or material used for final assembly, no liability shall be assumed

nor accepted for any damage resulting from the use by the user of the final

user-assembled product. By the act of using the user-assembled product,

the user accepts all resulting liability.

If the buyers are not prepared to accept the liability associated with the use

of this product, they are advised to return this kit immediately in new and

unused condition to the place of purchase.

Top Flite Models

3002 N. Apollo Dr., Suite 1

Champaign, IL 61822

Technical Assistance - Call (217) 398-8970

READ THROUGH THESE INSTRUCTIONS FIRST. THEY CONTAIN

IMPORTANT INSTRUCTIONS CONCERNING THE ASSEMBLY OF

THIS MODEL.

Congratulations for deciding to install a fully detailed, scale looking interior in your Top Flite Stinson SR9. This is a project that can be

as detailed or as simple as you care to make it – the choice is yours. We have provided the basic kit that can be assembled and painted

in a few hours. It represents a stock interior as delivered from the factory. The color scheme and minor surface details change from plane

to plane, so you may need to add extra goodies depending on the full-scale plane you modeled. By using this kit, some imagination and

your modeling experience, you can create a great looking interior that will “wow” them at the flying field.

SCALE INTERIOR KIT FOR THE GOLD EDITION STINSON SR9

TOOLS AND SUPPLIES

❏ 4oz. Aliphatic resin glue

❏ 1 oz. Thin CA (GPMR6002)

❏ Hobby knife and #11 blades

❏ Curved tip canopy scissors (HCAR0667)

❏ 220, 320 and 400-grit Wet-or-dry sandpaper

❏ Bar Sander (GPMR6170)

❏ Selection of small paint brushes

❏ Model enamel paint (Testors)

LEFTOVERS FROM AROUND

YOUR WORKSHOP

❏ Chrome trim tape – for seat belt buckles

❏ 1/4" balsa to raise the front seats to the

proper height

❏ Thin colored vinyl material to line the

interior of the doors and the floor (optional)

PARTS INCLUDED

STNGCIPL01..........(2) Front seats

STNGCIPL02..........(1) Rear seats

STNGCIPL03..........(1) Steering wheels (sheet of two)

STNGCIPL04..........(1) Instrument gauge lens

SCRW024...............(2) #2 x 3/8" Sheet metal screw

TAPE002.................(2) Black elastic tape

PIN001....................(3) #17 White head pin

PIN002....................(3) #28 White head pin

DOWEL004.............(2) 1/4" x 1" Wood dowel

BN40F05.................(1) Cockpit coaming

STNGCIIP...............(1) Laser-cut instrument panel

™

1 2 3 4

Summary of Contents

Page 1

WARRANTY... Top Flite®Models guarantees this kit to be free fromdefects in both material and workmanship at the date of purchase. Thiswarranty does

Page 2 - ASSEMBLE THE SEATS:

2ASSEMBLE THE SEATS:❏❏1. Cut the front seat bottom and back on the embossed cut line.❏❏2. The front seat consists of the bottom, back and vinyl tubing

Page 3 - FINAL INSTALLATION:

PAINTING:❏ 1. Before painting, thoroughly clean the parts with rubbing alcohol,then allow them to dry completely.❏ 2. Paint all the parts with model e

Page 4

Comments to this Manuals

No comments

Top-flite TOPQ8409 User Manual

Browse online or download User Manual for Air equipment Top-flite TOPQ8409. Top Flite TOPQ8409 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Air equipment Top-flite TOPQ8409